Precautions for the use and maintenance of the drone battery

Precautions after use 1. Please keep the battery power off before installing or unplugging the battery from the aircraft. Do not remove or insert the battery when the battery power is on, otherwise the power interface may be damaged. 2. If there is dirt on the battery interface, wipe it with a thousand cloth. Otherwise it will cause poor contact, resulting in energy loss or failure to charge. 3. Do not puncture the battery. If the battery is swollen, there is a fire safety hazard. Especially when it is charging, you should stop charging immediately and move the battery to a safe place. 4. Do not hit the battery. The impact will damage your Li-Poly battery. It is possible that the battery looks good but has a short circuit inside. If the battery is hit, please carefully remove the battery from the airplane and move it to a safe place, observe it carefully, and let it stand for 20 minutes. 5. If the drone’s battery is swollen, stop using it immediately. Some drones have a protective shell. If the installation is not smooth during the battery installation, it may be that the battery bulge will squeeze the protective shell. Up. Maintenance precautions Warehousing is a very important part of UAV battery maintenance. The necessary common sense for safe use of lithium-ion batteries at all times is very important for extending the life of UAV batteries. The following are some precautions for storage of lithium-ion batteries: 1. Do not store the battery near an open flame or a place with a heating source. 2. Do not store the battery in a humid environment or a place exposed to direct sunlight. 3. Make sure to store the battery in a dry place. In a normal temperature environment (the best ambient temperature is 10-30 degrees) 4. Please ensure that there are no flammable and explosive objects around the battery storage 5. Please ensure that there is no squeezing phenomenon during storage and transportation of the battery, and ensure that the battery is not squeezed by any external force 6. For batteries that will not be used for a long time, please charge the battery at about 50% and store it (single cell voltage is between 3.8V-3.9V) 7. Please check the battery storage environment frequently, preferably every 2-3 months The battery is charged and discharged once to maintain the stability of the drone battery. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Reasons for the explosion of lithium-ion batteries and protective measures taken by the batteries