Lithium-ion battery assembly tutorial explanation

●Before the assembly of the 48V lithium-ion battery pack, the calculation should be carried out according to the product size of the lithium-ion battery pack and the required load capacity, etc., and then according to the required capacity of the product to calculate the lithium-ion battery pack to be assembled Capacity, and then choose the lithium-ion battery according to the calculation efficiency. ●Sturdy containers for lithium-ion batteries should also be prepared to prevent changes when the lithium-ion battery components are listed. The material to cut off the lithium-ion batteries in series and for better reliable results, glue each two lithium-ion batteries together with adhesives such as silicone rubber. ●First place the lithium-ion batteries in a regular manner, and then use materials to hold each string of lithium-ion batteries securely. After securing each string of lithium-ion batteries, it is best to use insulating materials such as barley paper to separate each string of lithium-ion batteries, and arrange for the damage of the lithium-ion battery skin to cause a short-circuit environment in the future. ●After the separation is well organized and reliable, the nickel belt can be used to carry out the most important tandem steps. After the serial pacing of the lithium-ion battery pack is completed, only the subsequent processing and punishment are left. Bind the battery with tape, and cover the positive and negative poles with barley paper to avoid short circuits due to errors in subsequent operations. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Lithium-ion battery vs. lead-acid battery, which is better