How to maintain and maintain the 12V lithium iron phosphate battery pack?

12V lithium iron phosphate battery pack discharge precautions The lithium battery pack has an overcurrent protection function. When the use current of the electrical equipment exceeds the maximum output current of the lithium battery pack, the overcurrent protection circuit will act and the electrical equipment will appear to be unable to work normally . Maintenance and maintenance of 12V lithium iron phosphate battery pack ●After completing the installation of the battery according to the installation manual, before the battery is discharged for the first time, the battery should be fully charged before use. After the battery is fully charged and discharged 3 to 5 times, the battery can reach its maximum capacity. ●When the battery power is low, it should be charged in time, which will help to extend the battery life. If the battery is not charged in time, leaving the battery in a state of lack of power for a long time will affect the service life of the battery. If the battery is to be stored for a long time, it is best to keep the battery in a half-charged state, and to charge the battery once every 2 months, the charging time is one hour. ●The battery should be installed in a ventilated, dry and clean environment; when charging, prevent fire and flammable materials from approaching and disconnect the load (turn off electrical equipment). ●The working environment temperature of the battery is 5～40℃ (the best working environment temperature is 15～35℃). If it is outside this temperature range, the performance of the battery may change. The intuitive performance is the change of battery capacity or equipment Running time changes, this is normal. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What is the impact of temperature on UPS lead-acid batteries?