How to deal with battery leakage?

How to deal with battery leakage Generally speaking, battery leakage is mainly caused by the poor sealing between the upper cover or the bottom groove. This reason is the most common in daily use, and there are three other reasons that may cause it. The leakage of the battery is the leakage of the safety valve, the leakage of the wiring and the leakage of other parts. No matter what kind of reason, the battery leakage should be investigated and dealt with in time. The battery electrolyte is very corrosive. Do not let it touch your skin or clothing. You should throw away the battery immediately. Wipe the leaking night with a tissue first, and then wipe it twice with a dry cloth dipped in alcohol or white wine. Once again, use absolute ethanol to completely clean the leaked electrolyte, otherwise it will continue to corrode the battery contacts. The rusted battery contacts should be cleaned with a knife and sandpaper. If possible, a layer of solder can be used to solder with a soldering iron to prevent corrosion. 1. First check the appearance of the battery to check whether the battery shell is damaged or cracked. In many cases, battery leakage is caused by the battery collision during riding, so check the appearance first; 2. Take out the battery panel, Check the condition of the safety valve to see if there are any signs of leakage of the safety valve. If the safety valve leaks, it must be repaired or replaced; 3. When the first two parts are intact, the next step is necessary Check the airtightness of the battery, pressurize and inflate the water to see if there are bubbles, if bubbles appear, it means that there is leakage; 4. Observe the battery when charging to see if there is electrolyte flowing out, and confirm The degree of battery leakage. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How to correctly identify the battery capacity?