How to charge and discharge the lithium battery pack correctly?

The lithium battery pack is effective at any time, even if there is 50% charge before charging, it does not matter. This is because it is different from the Ni-MH battery, which has a memory effect but the lithium battery does not. But it should be noted that lithium battery packs cannot be over-discharged, as over-discharge will cause irreversible capacity loss. When the machine warns that the battery is low, charging will begin immediately. Do not overcharge. Stop charging when the charging completion indicator is on. If the battery will not be used for a long time, the battery should be removed from the instrument and stored in a dry and cool place, and charged once within 60 to 90 days to avoid excessive storage time, and the battery will be too low due to self-discharge, causing irreversible capacity loss. Because the best storage state for lithium battery packs is half-electric storage. Try to use the original lithium battery charger as much as possible. The original charger has strong supporting performance and moderate charging rate. There are some fast charging piles at present, and it is recommended that they cannot be used longer. It is excusable to use it once or twice in a year. Excessive current charging will cause greater damage to the internal structure of the battery. First of all, too high and too low power states have the most adverse impact on the life of lithium battery packs, and the number of charge and discharge cycles is of secondary importance. Therefore, the lithium battery pack will have partial discharge, so users do not need special methods and equipment during the activation process of the new lithium battery. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Introduction to lithium battery packaging technology