How is the 18650 lithium battery rolled?

How is the 18650 lithium battery rolled? The 18650 lithium battery must be turned on before rolling, and check the ambient temperature and humidity. Generally, the ambient temperature is above 15℃, and the humidity is below 40%. The pressure gauge indicating between 0.4 and 0.6mpa must be normal. 1. After turning the main power switch, press the power switch and the rectifier switch on the main electric box in turn. 2. Manual correction and centering: front and rear correction and centering: the correction controller of the small electrical box next to the winding device is in manual state, press the SET and SC keys, the screen displays C80. 3. Foil wear: foil is attached to the spool On the upper device, paste and roll it in the direction shown in Figure 3. Pay attention to the direction of the roller and try to keep the foil in the center of the shaft. 4. Unwinding tension and deviation correction: Turn on the tension switch of the small electrical box next to the winding device, adjust the winding tension to 0.35±0.05 scale, and the winding tension to 0.45±0.05 scale. Adjust the correction sensor to see if the value on the correction display is 0+/-5, then lock the sensor and press to automatically enter the working state. 5. Preparation before continuous rolling 1) The working mode of the final axis on the operation panel of the main electric box is set to positive and continuous. 2) Adjust the rolling speed according to the process requirements. Press the active work button, wait for the foil to proceed smoothly, and stop the foil. 3) Connect the roller plate to the lead foil. After the foil is received, the received foil is subjected to overpressure roll spacing operation. After all, we should end this situation: Tip: In the 18650 lithium battery roller press, an excellent roller press technician pays more attention to beating, compaction, walking speed, roller friction and winding. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.