EV battery

Do you know what are the important precautions for installing lithium battery packs?

by：Vglory 2021-03-20

(1) The connection of all wires must be firm. The bare copper wires are prohibited from touching each other (including cross-connecting). This will easily damage the controller, protect the lithium battery protection board, and not light up. During installation, it is forbidden to short-circuit between wires. (2) The waiting time for the light during the wiring process will vary according to the time set by the controller. The capacity of the factory lithium battery pack is generally half-electric, and the light will be darker when the first installation is The light will turn on normally after 2-3 days of normal charging. (3) The installation time of the lithium battery pack is generally carried out during the day, and it is not suitable to install it at night. (4) In the use of batteries, it includes the protection of aluminum-plastic composite film, top sealing (edge u200bu200bsealing at the pole end), side sealing, and protection against mechanical impact and short circuit. (5) Reliable positioning of the battery cell. After the lithium battery cell is assembled, it should be fastened firmly in the housing without moving, so that the entire lithium battery structure is in a consolidated state. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Explain the model specifications of cylindrical lithium batteries

Custom message