Teach you the correct use and maintenance of UPS batteries

Correct use and maintenance of UPS batteries are energy storage products that people use daily. Usually, the mentality of not maintaining batteries in processing batteries does not give too much attention, but if there is no battery to use and maintain it in the correct way, it will shorten the battery life, so choose On the basis of the normal standard of the battery, the battery must be protected in rational use. First of all, we must maintain an appropriate temperature to ensure the normal operation of the battery. For ordinary batteries, ensure that the temperature of the environment is between 20 and 25 degrees Celsius. Although we know that higher temperatures can effectively help improve the discharge capacity of the battery, it must be pointed out that the increase in temperature will also reduce the battery life. In addition, if the external environment temperature is too high, it will increase the rate of the internal chemical reaction of the battery, which in turn will promote the rate of increase in the ambient temperature. This vicious circle will accelerate the depreciation of the battery to a large extent, thereby affecting the normal use of the battery. At the same time, you must pay attention to the battery with regular charging and discharging, because the battery will discharge slowly when not in use. If the battery discharge reaches a certain level, the internal battery is below the specified minimum standard. The battery will be discharged, which is not conducive to the internal structure of the battery. Great influence, shorten the service life of the battery. Therefore, when performing routine maintenance and maintenance of the battery, the battery must be drained regularly, then charged for the normal eight hours, and then stored appropriately, only in the daily use of the battery. Reasonable and scientific maintenance, to solve the battery life is too short and the added cost this problem. With the development of information technology, portable electronic consumer products are becoming more and more popular, such as notebook computers, mobile phones, and digital cameras. Most of these portable consumer electronic products are powered by lithium batteries, so lithium battery chargers are very popular in the market. Next, a new smart lithium battery charger will be designed. When designing this lithium battery charger, it should be noted that the charger and the peripheral equipment of portable electronic consumer products must meet the requirements of small size, light weight, low heat, and easy to carry, etc., so the electronics of this circuit The components should be as small as possible. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: How to properly extinguish lithium-ion battery fires?