Precautions for UPS power installation

Precautions for UPS power installation 1. Reasonable choice of installation location is very important. The items on the shelves must be well ventilated and kept away from water, flammable gases and corrosive substances. 2. Keep the ambient temperature between 0 and 40 degrees. If it is disassembled and used at low temperatures, water droplets will condense. Once the ambient temperature exceeds 25 degrees, the battery life is halved every 10 degrees. 3. The rack UPS power supply should not be placed on the side, and the air inlet and outlet should be kept unobstructed; when the load is connected to the UPS, the load should be turned off first, then the connection should be connected, and then the load should be turned on in turn. 4. The size of the installation environment should be more than 800mm larger than the front, rear, left, right, and upper dimensions of the chassis to facilitate heat dissipation and daily maintenance; 5. Do not place any items on the top of the UPS power supply on the rack; the front and left and right sides of the equipment must be Leave enough space for maintenance and operation; 6. The battery can be installed in a special battery cabinet, which should be close to the UPS. If the battery is installed on a shelf or far away from the UPS, the battery switch should be installed as close to the battery as possible, and the wiring distance should be as short as possible. 7. Plan a specific path, and all passages should be able to bear the weight of the cabinet to pass through. So in this process, you should check the corridors, elevators and slopes to see if there are any blind spots. At the same time, once the power supply is ready, you should also check if there are other items in the cabinet. Finally, connect the battery pack to the UPS power supply on the rack, connect the input and output ends of the power supply, connect and turn on the power supply at the back end of the UPS power supply, and test the voltage of each connection with an external electric meter. No abnormal startup and debugging. The above is the assembly process of the rack UPS and the precautions for installation. Why not install it is best to ask professional technicians to install it to ensure safety. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.