Lithium battery forklift hydrating how long a time?
Lithium battery forklift needs often adding distilled water, in the process of charging and discharging cycle, the distilled water will evaporate, once not timely hydrating, forklift lithium battery plate will accelerate vulcanization, strong impact current to plate without electrolyte reaction, will accelerate active shedding of conductive material, serious will be scrapped, in the process of charging and discharging, the water in the electrolyte will gradually reduce by electrolysis and evaporation, led to the decrease of the electrolyte level. If the liquid level is too low and not complement in time, will affect the working condition of li-ion battery, shorten the service life of lithium-ion batteries. Therefore, lithium battery forklift every 5 - in the summer Every 10-6 days, winter 15 days should check the liquid level height. Found drawdown should add distilled water in time, make the liquid level reaches interface. Pay attention to the liquid level not too high, with higher plate 15 mm advisable. This is because the lithium battery electrolyte will expand, if the electrolyte is too full of will overflow from the lithium battery cover holes, corrosion car body, and may make positive and negative pile conduction, caused by discharge, affect the service life of lithium-ion batteries; More not literally added sulfuric acid solution, in case of change of the electrolyte concentration, affect the performance of lithium-ion batteries. Vulcanization of forklift battery lead sulfate has some difficult soluble of active substances, particle bulky, poor conductivity of lead sulfate, only a relatively low concentration in the electrolyte of battery charging, sulfide may be eliminated, the reason may be that the low conductivity of electrolyte concentration is low, shi and voltage can be better effect on the vulcanization of lead sulfate, making it easier to be converted into ordinary lead sulfate.