Lithium battery data recovery and application skills and lithium battery recovery skills

Lithium battery data recovery and application skills The recovery and settlement process of used lithium batteries mainly includes pre-solution, secondary solution and in-depth solution. Because there is still some electricity remaining in the waste battery, the pre-solving process contains deep discharge process, rupture, and physical sorting; the purpose of the second solution is to complete the separation of the positive and negative active materials and the substrate. Thermal solutions and organic solvents are commonly used. Method, lye dissolution method and electrolysis method to complete the separation of the two completely; the in-depth solution includes the two processes of leaching and separation and purification to extract valuable metal materials. According to the classification of the extraction process, the recovery methods of lithium batteries can be divided into three categories: dry recovery, wet recovery and biological recovery. 1. Dry recovery Dry recovery refers to the completion of the recovery of data or valuable metals without passing through the foreword such as solution. Among them, the main methods used are physical separation and high temperature pyrolysis. 2. Wet recovery The wet recovery process is to rupture and dissolve the waste batteries, and then use appropriate chemical reagents to select the metal elements in the leaching solution to produce high-grade cobalt metal or lithium carbonate, etc., and recover them straight. Wet method recovery is more suitable for recovery of waste lithium batteries with a relatively single chemical composition, and the equipment cost is relatively low, and it is suitable for small and medium-sized plans to recover waste lithium batteries. Therefore, this method is also widely used at present. 3. Biological recovery Mishra and others use inorganic acid and acidophilic Thiobacillus ferrooxidans to extract metals from waste lithium batteries, and use S and ferrous ions (Fe2+) to generate metabolic products such as H2SO4 and Fe3+ in the leaching medium. Lithium battery recovery technology 1. The pyrometallurgical method uses high-temperature roasting of discarded lithium batteries that have undergone simple mechanical rupture, and sieving to obtain fine powder containing metals and metal oxides. 2. After the waste battery is ruptured by hydrometallurgy, it is selectively dissolved with a suitable chemical reagent to separate the metal elements in the leachate. 3. Physically disassemble the battery pack to obtain high-content substances after rupture, sieving, magnetic separation, precision crushing and classification, and then proceed to the next step of recovery. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Interpretation of Lithium Electric Vehicle Charging Methods