How to use and maintain UPS battery?

Use and maintenance of UPS power battery 1. It is forbidden to connect inductive loads to the UPS output port 2. When using UPS power batteries, strictly abide by the relevant regulations in the product manual or user manual, and ensure that the live, neutral, and ground wires are connected Meet the requirements, users are not allowed to change their mutual order at will. 3. Operate strictly in accordance with the correct startup and shutdown sequence. Prevent the UPS power supply from being unable to work normally due to large fluctuations in the voltage output of the UPS power supply battery when the load is suddenly loaded or suddenly reduced. 4. It is strictly forbidden to turn off and on the UPS power supply battery frequently. It is generally required to wait at least 6 seconds after turning off the UPS power supply before turning on the UPS power supply. Otherwise, the UPS power supply may enter a startup failure state, that is, the UPS power supply enters a state where there is no mains output and no inverter output. 5. Prohibited Overload usage. The maximum starting load of the UPS power battery is best controlled within 80%Z. If it is overloaded, it will often break down the inverter tube in the inverter state. 6. Battery discharge requirements: Generally, UPS has protective measures for battery discharge. But after the battery is discharged to the protection shutdown, the battery can be restored to a certain voltage, but it is not allowed to restart at this time, otherwise the battery will be over-discharged. UPS must be recharged before it can be put into normal use. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the common positive and negative materials of lithium batteries?