How to use and maintain lithium-ion power lithium-ion batteries?

Use of Lithium Ion Power Lithium Ion Battery 1. Before installation and during use, it is found that the battery has abnormal mechanical characteristics such as swelling, shell rupture, shell melting and deformation, shell distortion, etc., immediately stop using the battery and store it separately; 2. When When the meter shows that the battery level is low, the lithium-ion power lithium-ion battery should be charged in time to prevent the power loss of the power lithium-ion battery from affecting the normal use of the battery and even shorten the service life of the power lithium-ion battery. 3. If the temperature of the battery exceeds 60℃ during use, stop using the battery immediately and put the battery alone. If the temperature continues to rise, it should be buried in sand; 4. Try to prevent splashing of water or other conductive objects during charging and discharging. Go to the upper cover and pole of the battery; the daily maintenance method of lithium-ion power lithium-ion battery 1. Have professional personnel to take care of during the charging operation. Make sure that the plug and the socket are in good contact during the charging process to ensure that the charging equipment is working properly. The connection point is in good contact. If there is an abnormality, you must repair it before charging; 2. Check the battery voltage, temperature, pressure difference and other status displayed on the BMS display before charging and discharging to ensure that all values u200bu200bare within the normal range; 3. Check the appearance of the battery pack: The battery pack cover and electrode column should be clean, and there should be no dust, metal shavings and other dirt. If there is, it should be cleaned with compressed air; the battery pack shell should not have cracks, swelling, deformation, loose poles and other abnormal conditions; 4. Battery pack leakage detection: In order to reduce the working current of electric equipment in electric vehicles, the working voltage of lithium battery packs generally adopts a voltage specification above 300V DC. Lithium-ion battery packs for automotive lithium-ion power have high insulation requirements. The insulation performance of the vehicle is measured by the insulation resistance of the DC positive and negative bus bars of the battery pack to the ground, which meets the safety requirements. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the ways to identify the authenticity of the battery?