How to store the battery under high temperature

1. It is recommended to have a fixed facade or warehouse (excluding residence) for storage of batteries, and the storage area should not be less than 25 square meters; 2. The storage area of u200bu200bbatteries should have monitoring and alarm equipment, lighting equipment, and fire fighting equipment. If there are more goods stored, it should be equipped The corresponding warehouse manager will inspect the fire safety of the line from time to time. At night, the working equipment (such as test equipment, charger, etc.) should be disconnected. 3. The storage battery should be stored with a tray, which is convenient for loading and unloading and reducing the loading and unloading process. Cause damage to the battery; if there is no tray, the product should be handled with care during the handling process, and avoid dropping, rolling, and heavy pressure; it is forbidden to carry the packaging bag by hand, and beware of hurting hands and feet; 4. When the battery is received or before storage It must be inspected to see if there are signs of damage on the appearance, and whether the battery is wet or rained; 5. Ground requirements (hard floor tiles, cement surface), the ground is kept clean, tidy and free of debris; it is forbidden to stack items on the battery. Especially the items that are easily conductive and corrosive; 6. The new battery and the battery to be tested should be placed separately, and the after-sales battery to be tested should be placed away from the new battery; 7. The storage environment of the battery must be dry, clean, well-ventilated, and protected from sun and moisture. The storage temperature should be controlled between 5℃~40℃, and effective cooling measures such as fan heat dissipation or air conditioning must be taken when the temperature exceeds 40℃; 8. The storage location of the battery should not be exposed to direct sunlight, away from heat sources (heating equipment, etc.), easy Flammable and explosive materials and chemicals. It should be at least 2m away from the heat source; 9. When accumulating storage batteries, they should be stacked in stacks. The maximum number of horizontal and vertical stacking rows in each stack is 5 rows. A gap of not less than 20cm should be left between the stacks to facilitate the battery heat dissipation. The number of layers of batteries should be the highest number of layers specified in the carton; it is strictly forbidden to put them upside down or on their sides, and they should not be subjected to any mechanical shocks or heavy pressure. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Brief description of the working principle of lithium batteries and future development prospects