How to properly use the protective battery?

The battery should be properly used and protected from the following aspects: 1. Maintain a proper ambient temperature. An important factor affecting battery life is the ambient temperature. Generally, the best ambient temperature required by battery manufacturers is between 20-25°C. Although the increase in temperature improves the discharge capacity of the battery, the price paid is that the life of the battery is greatly shortened. According to experimental measurements, once the ambient temperature exceeds 25°C, the life of the battery will be shortened by half for every 10°C increase. 2. Charge and discharge on time. The float voltage and discharge voltage in the UPS power supply have been adjusted to the rated value at the factory, and the discharge current is increased with the increase of the load. The load should be adjusted reasonably during use, such as controlling electronic equipment such as microcomputers. The number of units used. 3. Use the communication function. At present, most large and medium-sized UPS power supplies have operational functions such as communication with microcomputers and program control. Install the corresponding software on the microcomputer, connect the UPS power supply through the serial/parallel port, and run the program, then the microcomputer can be used to communicate with the UPS power supply. 4. Replace the used/broken battery in time. At present, the number of batteries in large and medium-sized UPS power equipment ranges from 3 to 80, or even more. These single storage batteries are connected by circuits to form a storage battery pack to meet the requirements of the UPS power supply for DC power supply. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the maintenance solutions for UPS batteries?