EV battery

How to prevent UPS battery explosion?

by：Vglory 2021-03-21

When the battery is transported or installed, the shell has cracks and is not found in time. The acid liquid inside the UPS battery is installed and chemically reacts with the battery rack or battery cabinet until the conduction fires. UPS battery explosion prevention measures: 1. Control the amount of charge, but charge to reduce the amount of gas evolution. Open flames are strictly prohibited in the charging room and keep well ventilated. 2. During charging, the connection point should be firm to prevent sparks due to looseness. 3. Low-voltage constant-voltage charging is used during use, with less gas evolution. 4. Prevent UPS battery shell cracks, electrolyte penetration, and seepage into cable trenches, causing sparks in short circuits, fire and explosion. 5. Although the maintenance-free battery has been sealed and equipped with an exhaust valve, a certain amount of hydrogen and oxygen gas is stored in the battery. Once the exhaust valve fails or fails, the internal pressure will be too large, and the battery will crack, even Explosion, fire. Therefore, the reliability of the exhaust valve must be maintained. Disclaimer: Some pictures and contents of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the characteristics of cylindrical batteries, square batteries and soft-pack batteries?

Custom message