How to extend the life of polymer lithium ion battery

We all know that the storage environment of the battery is very important, so it is necessary to put the battery in a cool, dry and well-ventilated place. Ideally, the temperature should not be higher than 24 degrees Celsius. At the same time, for ventilation, a certain space should be left on each side to facilitate air circulation. In addition, because the battery has a chip to calculate the power, for calibration, a complete re-discharge is required every month, that is to say, it is completely charged with no power after it is used up. This is also good for batteries. In order to ensure a longer battery life, be sure to use the original battery charger to charge the battery, which will protect the battery. Another caveat is that the battery load should not exceed 80% of the rated capacity of the polymer battery, as this will result in reduced operating time. As the load increases, the running time decreases. If the power fails, a fully charged battery will quickly deplete and release its battery power, which will reduce the life expectancy of the battery and cause great damage. Regarding the new battery, in order to recycle the battery as soon as possible, the new battery should be used up as soon as possible, not more than 12 months. This regular use can activate the battery and extend its life. Place your APCUPS in a cool, dry and well-ventilated location. Ideally, the temperature of the place where the UPS is placed should not be higher than 24 degrees Celsius. At the same time, for ventilation purposes, leave about 1 to 2 inches of space on each side to facilitate air circulation. Since there is a chip in the battery to calculate the power, in order to calibrate, a complete re-discharge should be done once a month (that is, the battery is fully charged and used until it is empty). New batteries should be used up as soon as possible, at least not more than 12 months. Do not load more than 80% of the rated capacity of the polymer battery, as this will reduce the running time. When the load is increased, the running time will be reduced accordingly. If the power source cannot supply power, a UPS operating at full load will quickly run out and release its battery power, which will reduce the expected life of the battery. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Why can't lead-acid batteries and lithium-ion batteries be used in parallel?