How to charge the battery?

If we want to extend the effective use time of the battery, in addition to guaranteeing the quality of the charger, correct charging techniques are also essential, because poor quality chargers or wrong charging methods will affect the battery's use time and Cycle life. 1. Before the battery leaves the factory, the manufacturer has carried out activation processing and pre-charged, so the battery has residual power. Some friends say that the battery is charged according to the adjustment period, and the standby is still seriously insufficient. If the battery is indeed a genuine battery In this case, the adjustment period should be extended and then 3-5 full charge and discharge cycles. 2. If the newly purchased mobile phone battery is lithium-ion, the first 3-5 recharges are generally referred to as the adjustment period, which should be charged for more than 14 hours (see the charger for details) to ensure full activation of the lithium-ion activity. Lithium batteries have no memory effect, but are very inert. They should be fully activated to ensure the best performance in future use. 3. Some automated smart fast chargers only indicate that they are 90% full when the indicator lights change. The charger will automatically change to fully charge the battery with slow charging. It is best to use the battery after it is fully charged, otherwise the use time will be shortened. 4. Before charging, do not discharge the lithium battery. Improper discharge will damage the battery. 5. When charging, try to charge slowly and reduce fast charging methods; the time should not exceed 24 hours. 6. Don't expose the battery to high temperature or severe cold. When it's like a dog's day, don't put the digital camera/mobile phone in the car to withstand the scorching sun; or put it in an air-conditioned room and put it in a place with direct air-conditioning. When charging, it is normal for the battery to have a little heat, but it should not be subjected to high temperatures. In order to prevent this from happening, it is best to charge at room temperature and do not cover anything on the machine. 7. The NiCd battery must be completely discharged before charging, and the battery must be fully charged after recharging. 8. If the digital camera/mobile phone battery is left unused for too long, it is best to apply to the mobile phone maintenance department for an activation treatment for the battery, or you can use a DC barostat by yourself, adjust the voltage to 5-6V, and the current 500- 600mA reversely connect the battery. Note that you can release it with one touch and repeat at most three times. After this treatment, you can use the original charger to charge during the adjustment period. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the reasons for the flatulence of soft-pack lithium batteries?