Do you know the correct charging method for lead-acid batteries?

2. It should be noted that over-discharge and over-charging are absolutely not allowed. Over-charging is a process in the chemical workshop, which will cause the grid metal layer to become thinner and easily break the grid. Excessive discharge will cause the electrode plate to vulcanize and the active sponge structure to fail. To shorten the life of the plate, lead-acid batteries should pay attention to the specific gravity and liquid level of the electrolyte, and should not be short of liquid. 3. Generally, the chargers for charging lead-acid batteries of electric vehicles use three-stage charging mode. When 100% of the electricity is used up, the charging time will be 8-10 hours, not more than 12 hours. The battery life will be affected. It is best not to run out of electricity every time you use it. It is recommended to charge the electric vehicle when the electricity consumption is about 70%. The charging time is generally about 6 to 8 hours. 4. The environment with too high temperature or too humid is not suitable for charging electric vehicles, which is easy to cause danger. The environment for charging lead-acid batteries of electric vehicles should be as ventilated as possible, and at the same time, choose a flat place to continue charging. 5. The charging time of lead-acid batteries should be properly controlled at about 8-10 hours, not more than 8 hours in summer, and not more than 10 hours in winter. After the charger indicator turns green, then float for about 1-2 hours to stop charging. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Do you know which is better between lithium batteries and lead-acid batteries?