Brief analysis of mobile phone battery is not durable solution

The solution to the battery is not durable? 1. Please use the original charger or a reputable brand charger. Lithium battery chargers should be used exclusively for lithium batteries and follow the instructions. 2. If the newly purchased mobile phone battery is a lithium battery, the first 3 to 5 charges are generally called the adjustment period, and the charging time should exceed 14 hours to ensure that the lithium ion activity is fully activated. Lithium batteries have no memory effect, but are very inert and should be fully activated to ensure the best performance in future use. 3.Before the battery leaves the factory, the manufacturer has performed activation processing and pre-charge, so the battery is all the surplus power. A friend said that the battery is charged according to the adjustment period, and the standby is still seriously insufficient. Assuming that the battery is a real battery, this In this case, the adjustment period should be extended and charge and discharge should be carried out thoroughly 3~5 times. 4. Before charging, do not specially discharge the lithium battery. Improper discharge will damage the battery. When charging, try to charge as slowly as possible and reduce the way of fast charging; do not exceed 24 hours. The battery's chemical substances can be fully activated after three to five complete charging and discharging cycles to achieve the best use effect. 5. Some active smart fast chargers will only change when the indicator is 90% full. The charger will actively change and charge the battery at a slow speed to fully charge it. It is best to use the battery after it is fully charged, otherwise the use time will be shortened. 6 There are many users who are often responsible for the phone that is still open. In fact, it will be very simple to damage the life of the phone. Because the circuit board of the phone will be hot during the charging process, if there is a foreign phone at this time, it may appear instantaneously. Return current to the internal parts of the mobile phone. 7. The life of the battery depends on the number of repeated charging and discharging, so try to prevent the battery from being charged with too much power, which will shorten the life of the battery. When the phone is turned off for more than 7 hours, the battery of the phone should be fully discharged, and then use it after being fully charged. 8. The cell phone battery has a self-discharge function. When not in use, the daily discharge capacity of nickel-metal hydride batteries is about 1% of the remaining capacity, and the daily discharge capacity of lithium batteries is about 0.2% to 0.3%. Try to use a dedicated socket when charging, and do not share the charger socket with televisions and other electrical appliances. Although the mobile phone is in the network coverage area, when the mobile phone is turned off and charged, the mobile phone will not be able to receive and make calls. At this time, you can use the fixed phone that the mobile phone does not have the processing function. In order to prevent the loss of the call, this method is not covered by the mobile phone network or weak signal, so it cannot be connected temporarily. 10. Do not expose the battery to high temperature or extremely cold environment, such as three volts, do not put the mobile phone in the car, or expose it to the sun; or move the air-conditioned room into the place where the cold wind blows directly. It is normal for the battery to be a little hot while charging, but it should not be affected by heat. To prevent this, it is best to charge the phone at room temperature and do not cover the phone with anything. 11. Before charging, make sure that the battery is completely discharged, and after charging, make sure that the battery is fully charged. 12. If the mobile phone battery is not used for a long time, it is best to apply to the mobile phone maintenance department for battery activation. You can also use a DC constant voltage device, adjust the voltage to 5~6V, and the current to 500~600mA. . Note that tapping to release can be repeated up to three times. After this process, use the original charger to charge during the adjustment period. 13. When charging, the longer the better. If the battery without protection circuit is fully charged, you should stop charging, otherwise the battery will affect its function due to heat or overheating. 14. The lithium battery should choose a special charger, otherwise it may reach saturation and affect its function. After charging, it should not be left on the charger for more than 12 hours, and should be separated from the battery and mobile phone during long-term use. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Which is better, lithium polymer battery or lithium battery