26650 lithium iron phosphate battery charging items and method introduction

26650 lithium iron phosphate battery charging precautions The 18650 lithium ion battery charger can charge the 26650 lithium iron phosphate battery, but the charger of the 18650 lithium ion battery may have a relatively high voltage, which may damage the 26650 lithium battery. The voltage of 18650 lithium ion battery is 3.6V and 4.2V, and the voltage of 26650 type is 3.2v and 3.6V. Note 1: Prevent the temperature from being too high during charging. If the temperature during charging is higher than the specified operating temperature (35°C), the power of the lithium-ion battery will continue to decrease, that is, the power supply time under full charge will be shortened, which will affect the 26650 iron phosphate The quality of lithium-ion batteries causes damage and reduces battery life. Note 2: Prevent the temperature from being too low during charging. If the battery is in a low temperature environment during charging, the battery’s power will continue to decrease, or even fail to charge. However, the situation is different from that in a high temperature environment, and it is not permanent damage. When the temperature rises to an appropriate level, the power of the lithium iron phosphate battery will return to its previous state. Note 3: Frequent use will make the electrons in the 26650 lithium iron phosphate battery always flow, which is conducive to the extension of its life. If you don't use it often, remember to complete a charge cycle for the lithium-ion battery every month, that is, deep discharge and deep charge once. 26650 Lithium Iron Phosphate Battery Charging Method The most suitable charging process for 26650 lithium iron phosphate battery can be divided into four stages: trickle charge, constant current charge, constant voltage charge and charge termination. 1. Shallow discharge and shallow charge Regarding the 26650 lithium iron phosphate battery, it is more beneficial. Only when the power module of the product is calibrated for the lithium battery, it is necessary to discharge and charge deeply. Therefore, in the daily use process, you can recharge without being stuck with photoelectricity, and you can charge as you use it, putting convenience first. 2. There is no special method to activate the lithium ion battery. The lithium ion battery will be naturally activated during normal use of the machine. Therefore, all the pursuits of 12 hours of ultra-long charging and the use of single-cell lithium-ion batteries for automatic shutdown are wrong. 3.26650 Lithium iron phosphate battery should be charged with a matching charger. In the industrial supporting market, since each product is packaged separately and is not compatible with each other, the corresponding charger should be selected according to the lithium-ion battery pack used and charged in strict accordance with the requirements. . Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Introduction to the safe use of lithium-ion batteries