The use of mobile power battery and maintenance instructions

Source: 2020 - 04 - 02 14:04 hits: once the use of mobile power supply and maintenance of the following are some of the rules: (you can follow 1) After a full charge, don't charge for a long time, This is not very important, because generally charger or computer intelligence, immediately full stop) , especially the use of so-called universal charger or bad charger. ( 2) Use a dedicated socket as far as possible when charging, don't share the charger socket with electric equipment such as TV, especially of small capacity socket. This is not very important, because the charger can withstand voltage fluctuation and undervoltage. ( 3) Don't put battery exposed to high temperature or low temperature. ( 4) Don't run out of battery, timely reminder to recharge. ( 5) Do not use the battery for a long time. ( 6) Before first use rechargeable battery should be fully discharge. ( 7) Ensure that charge and discharge (once a month The lithium battery) 。 ( 8) Try not to use quick charge. ( 9) Don't use the brand charger. ( 9) Try not to let the phone on while charging, Lithium battery is not a problem) 。 ( 10) If the cell phone battery time is too long and is not used, the best part of the mobile phone repair request to the battery activation treatment. Use the information of mobile power supply output voltage planning, although some device with USB interface, but also need to use mobile power supply. However, you should pay attention to the input voltage of your device. Output voltage of the entire mobile power supply planning is 5. 0± 0. 5v。 If you do not belong to the mobile power supply equipment required for the input voltage planning planning, so, it is recommended that you do not use mobile power source for your device, to ensure that your mobile power supply service life.