The essentials of correct conditioning and maintenance of batteries

Batteries are an indispensable part of automobiles. According to the types of batteries available in the market, they can be roughly divided into two types: traditional lead-acid batteries and maintenance-free batteries that have just been popularized in China in recent years. ●For maintenance-free batteries, always check the color of the electric eye. Green means the power is rich; black means the power is insufficient and needs to be increased to make up for the power; gray or light yellow means the electrolyte is insufficient, because the maintenance-free battery cannot be filled with fluid, the battery should be replaced immediately. ●The battery should be firmly installed in the car to prevent the battery cable from falling off due to vibration during driving, and prevent the power supply from being interrupted. ●Keep the appearance of the battery clean. If solid oxides appear on the poles, they should be flushed with hot water in real time to eliminate them, so as not to affect the continuity between the poles and the terminals. After cleaning, wipe and clean the appearance of the battery, and put butter on the poles and terminals to ensure that the poles are not oxidized. ●Check the height of the electrolyte at least once a month. For batteries without a symbol line, the electrolyte can be added to a height of 10-15mm above the plate; for batteries with two red lines, the electrolyte cannot be higher than the upper red line. ●According to regional and seasonal differences, the electrolyte concentration will be adjusted. In winter, the concentration of electrolyte should reach 1.28 g/ml. ●Permanent cars should be mobilized every other month and run at a medium speed for about 20 minutes. ●According to regional and seasonal differences, the concentration of electrolyte will be adjusted. In winter, the concentration of electrolyte should reach 1.28 g/ml. ●The total time for each mobilization of the car is not more than 5 seconds, and the interval between restarts is not less than 15 seconds. In an environment where the vehicle cannot be started after repeated starts, the reason should be found from other aspects such as the circuit, incineration coil or oil circuit, and the mobilization machine should be started after the obstacle is removed. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What is the basic manufacturing process of lithium-ion batteries?