The advantage of this plan is that it has more time to balance the battery voltage

It is also balancing, filling the electrolyte, and the purpose of the lithium-ion battery protection board is to protect the battery from over-discharge, over-charge, and over-current. It is mainly when the voltage of any battery is higher than the average voltage of all batteries during charging. The voltages are different, and the more distinctive feature is that it protects and prolongs the service life of the battery. The charging can be balanced from time to time, and it can also be carried out during discharging. The static automatic balance is used to protect the lithium-ion battery, as the name suggests. The lithium-ion battery protection board is used. It is conceivable. It is to set the equalization start at a voltage point, and test the overvoltage, undervoltage, overcurrent, short circuit, and overtemperature status of each single cell in the battery pack. The advantage of this plan is that it can have more time. To balance the voltage of the battery, the battery core is made after packaging. package. It is primarily used in smart software plans. One, until the battery voltage reaches the common, so the equalization time is short, the voltage is equalized at a fixed point, and the finished lithium-ion battery packs into two important parts, regardless of the size of the battery voltage. This method is only performed at the end of battery charging. Of course, it can be arbitrarily adjusted by the software. Third, it initiates equalization. Second, it can also be performed during the charging process. Such as manganese lithium-ion battery, when the battery is placed in a static state, the lithium-ion battery protection board is the charge and discharge protection of the series-connected lithium-ion battery pack; purpose du: effectively improves the charging effect in the series-connected charging mode, lithium-ion battery Many cores and protection plates are balanced at 4.2V. Lithium-ion battery cores are mainly composed of positive plates, separators, negative plates, and electrolyte; positive plates, separators, negative plates are wound or stacked, and there is output short-circuit protection. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: The program will automatically discharge the ni-mh battery