How to use lead-acid batteries correctly?

Correct use of lead-acid batteries ●Pay attention to the charging environment. The best environment temperature for lead-acid batteries is 25℃. Now most chargers do not have an automatic control system that adapts to the ambient temperature, so most chargers are designed according to the ambient temperature of 25°C, so charging at 25°C is better. ●It is strictly forbidden to drive without electricity: some users will charge the battery until the electric bike is not moving, which will seriously damage the battery performance. Multiple deep discharges will greatly shorten the battery life. If the battery is insufficient on the way, it is best to pedal in advance to assist , To prevent deep discharge, it must be fully charged in one charge, and use it if it is not fully charged, which will reduce the service life of the battery. Usually, try to prevent charging at the fast charging station. ●Don't drive with overload: especially don't overload on the uphill section, because the sudden increase of the current will cause damage to the battery and easily cause the motor controller to burn out. ●Deeply discharge the battery once every 1-2 months: some active material will inevitably precipitate after the battery is used for a period of time. If the active material is not activated in time, it will inevitably cause a certain drop in battery capacity. ●Prevent the battery from being exposed to the sun: the battery cannot be charged immediately after being exposed to the sun, otherwise it will cause the battery to crack or deform, and it can be charged only after it has cooled down. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the assembly steps for lithium batteries?