How to share mobile phone battery activation

How to charge mobile phone batteries? Mobile phone battery charging is the most common problem of mobile phones. There are not many ways to deal with mobile phone battery charging, but sometimes mobile phone battery charging does not activate the battery's ability to deal with this problem. The following author shares with you the method of cell phone battery activation, I hope it will be helpful to you. The battery life of the mobile phone is long, and the problem of power attenuation occurs. Mobile phone batteries generally have a battery protection circuit. When the battery is fully charged, it will activate protection to prevent battery overcharging. Similarly, when the battery is used too little and the voltage is too low, it will also activate protection to prevent battery over-discharge and battery failure. The battery must be activated at this time. The mobile phone battery is not charged enough to activate the demand: 1. The battery charging speed is very fast, more than 1 hour or less than 1 hour, the charging capacity reaches 100%; 2. After the charging reaches 100%, unplug the charging plug and recharge, and the charging capacity drops to 50%-80%; 3. After the charging reaches 100%, the battery display capacity of the mobile phone is insufficient, as long as 3 or 4 bars; 4. The first 2 or 3 batteries of the mobile phone battery are not used, and then several batteries are more than the previous ones Battery; 5. The mobile phone battery has been placed for a long time. During the storage process, the battery power is automatically exhausted (mobile phone battery self-consumption, important in the power consumption battery protection board), the chemical substance loses activity, in most cases , For a long time. If the battery cannot be charged, the battery must be activated; 6. When the battery of the mobile phone is over-discharged, when the battery voltage is lower than 2.5v, the battery protection panel will disconnect the power supply for charging, and the battery protection setting will start. At this time, the battery must be activated; 7. When the lithium battery of the mobile phone starts to age, the general performance is that the battery is almost full when charging, but the battery will soon crash during use, and this battery must be activated Fix! There are several ways to activate the mobile phone battery: 1. When the mobile phone battery is over-discharged, when the battery voltage is lower than 2.5v, the battery protection panel will disconnect the power supply for charging, and the battery protection setting will start. At this time, the battery needs to be activated. Disassemble the battery and directly charge the positive and negative electrodes of the battery, and the charging voltage is higher than 2.5v. The battery protection board resumes normal charging. 2. Lithium batteries can also be regenerated by freezing. The battery is sealed with multiple layers of absorbent paper and multiple layers of plastic film, placed in the refrigerator for 2-3 days, taken out at room temperature, and placed for 2 days. Charge the battery after 2 days, and normal use can be restored after full. 3. When the battery power is too low or the voltage is too low, the battery protection board will start the protection. If the protection is activated, the battery cannot be charged. Application: Check the working current of the mobile phone, according to the current identification of the mobile phone failure, directly buckle and use it. 1. Deal with Apple 6G (4.7 inches) and general power cords prompting that the boot temperature is too high, and the menu cannot be booted normally. 2. Deal with the standby restart problem after the universal power cord is started. 3. Handle the protection of general power cord startup, excessive current of camera personnel, automatic shutdown, power failure, etc. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: How to solve the problem of slow battery charging?