How to recover the imbalance of the lithium battery pack?

1. First charge the entire lithium battery pack, and perform floating charge within 2-3 hours after turning on the light. If the battery is not powered for a long time, you can charge it normally on the protection board for 10 minutes (charging at the outlet), and then charge it normally. 2. Pull out the protection board circuit and pull out the plug, and then make a mark, the two wires on the board cannot be restored. Measure the voltage on the adjacent pin on the line. Regarding 48V, there are 16 voltages, and 60V is 20 voltages. The first group of voltages from the negative pole is the voltage at which the battery pack changes from the first row to the negative pole. Find a single string with a voltage lower than 3.50V, determine the positive and negative values, and determine the negative values u200bu200band mark them. 3. Use a 3.6V charger to charge a single line with a voltage of 3.50V to 3.60 to 3.70V. However, someone should stop overcharging the spare lithium battery. 4. Insert the cable in the original order, pay attention not to reverse the connection, install the battery, and then put it into use. If you continue to use the lithium battery pack, the capacity of the lithium battery will naturally decrease. This is related to the material properties of lithium batteries, and is related to the material properties of lithium batteries. The simple understanding is that with regard to lithium batteries, the activity of lithium ions continues to decline until the final capacity is completely reduced. 5. In order to prolong the service life of lithium battery packs, it is usually recommended to use lithium batteries in shallow charge and shallow discharge modes, or to charge them when too many lithium batteries are not used or the power is insufficient. Regarding the life span of lithium batteries, it is undesirable. The nature of the decrease and attenuation of lithium battery pack capacity is the decrease of lithium ion content, which is mainly caused by structural material failure or inactivation of positive and negative electrodes, electrolyte degradation, and lithium battery abuse. In order to extend the life of lithium batteries, they must be used correctly. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the matters needing attention for lithium battery solar street light equipment?