How to maintain UPS power battery?

Maintenance of UPS power battery 1. Operating environment: recommended ambient temperature range, charging 0~+40C, discharging -15~+50C 2. Battery storage: High temperature or poor ventilation during storage and transportation of the battery will increase self-discharge Therefore, keep the battery well ventilated and keep the battery away from open flames, sparks, heat sources, etc. 3. Prevent overcharging: overcharging will increase the water loss of the battery, accelerate grid corrosion, soften the active material, and increase the possibility of battery deformation. Should try to prevent the occurrence of overcharging. 4. The charger should be well matched with the battery, and the operating conditions of the UPS power supply battery during the high temperature season and the changes during the entire service life should be fully known. Do not place the battery in an overheated environment during use, especially when charging, keep it away from heat sources. 5. The installation position of the UPS power battery should be as good as possible to ensure good heat dissipation. If it is found to be overheated, stop charging and check the charger and battery. When the battery discharge depth is shallow or the ambient temperature is high, the charging time should be shortened. 6. Prevent short circuit: When the battery is in short circuit state, its short circuit current can reach hundreds of amperes. UPS batteries must not be short-circuited. Be careful when installing or using them. The tools used should be insulated. When wiring, you should first connect electrical appliances other than the battery. After inspection, there is no short circuit. Finally, connect the battery. Good insulation to prevent rupture due to overlapping pressure. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: How to recycle the battery?