How to choose a suitable rack UPS power supply?

How to choose a suitable rack UPS power supply? First, determine the power segment: in short, first confirm the power of the equipment we want the rack UPS to load, and then confirm the power of the UPS. Generally speaking, we recommend that the load power accounts for 30%~80% of the UPS power. If the load is too large, the rack UPS power supply may be overloaded when it is started at the same time. If the load is too small, it will not only cause waste, but also be bad for the performance of the battery. 2. Choose the working mode of rack-mounted UPS: There are three common working modes in the market: backup, online interactive, and online double conversion (line pure online). The details are as follows: (1) backup UPS, Without voltage stabilization, there is a conversion time during the conversion between the mains and the battery. It is generally used for personal computer protection or when the UPS power supply performance is not required. This type of UPS power section is generally small; (2) online interaction Type, without voltage stabilization, there is a conversion time during the conversion between the mains and the battery, but it has a voltage regulation function. It is generally used in wiring closets or micro computer rooms to protect servers and network equipment. This type of UPS power range is generally below 5KVA. 3. Installation methods Generally speaking, there are two installation methods for UPS power supply. One is tower installation and the other is rack installation. You can choose according to your computer room environment or on-site environment. The UPS power supply supports these two installation methods at the same time. In most cases, the rack-mounted UPS can also be installed in the tower, but the tower UPS may not be able to be installed in the rack, because the tower UPS may not be able to do it. Install the rails. Therefore, after confirming the power range and working mode of the rack-mounted UPS, be sure to confirm whether the UPS power supply can meet your installation requirements. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the classifications of new energy vehicles by battery?