How Marine parallel battery charging at the same time?
Because the host start battery and hold the battery isolation, you will be faced with how to use single output point of the problem of the charger to recharge them at the same time. If you don't just forced to two separate battery, may be damaged. So we need to use the batteries in parallel, double the output of the charger and battery separator. These products can be induced to each battery voltage, when a battery voltage rise, can connect it with other battery. Two batteries can charge and keep parallel at the same time, when the voltage drops, they are separated. This is why when charging, the engineer will timely adjust the battery switch, in order to maximum capacity for two sets of charging, and then completely separated, can guarantee to start the host. Need to replace the current Marine battery switch? If possible, we recommend to use OFF - Switch ON. OFF - it is easy to operation Switch ON, but is likely to be OFF - 1 - 两个- 2 switch. , of course, you can also use the two switch at the same time, but it would be too complex and difficult to understand the function of every specific switch. Moreover, the battery switch is not much, use OFF - Switch ON, can also reduce the possibility of damage to the charger.