Tutorial about lithium iron phosphate 48V battery module

1) Choose a suitable battery and match the battery type, voltage and internal resistance. Please balance the battery before assembling. Cut electrodes and punch holes. 2) According to the aperture size, calculate the distance and cut the insulating board. 3) Screw on, please use a hexagonal nut with flange to prevent the nut from falling off, screw on and fix the lithium battery. 4) When connecting the welding line and the voltage collection line (equalization line), the protection board must not be connected externally to avoid accidental burning of the protection board. 5) The insulating silica gel is fixed again, it will solidify after a long time. 6) If you forget to balance the battery cells before removing the protection board, this is the last chance before assembling the lithium battery, you can balance it through the balance line. 7) Fix the whole battery pack together with heat insulation board and wrap it with nylon tape, which is more durable. 8) When packaging the battery core as a whole, please fix the battery core and the protective plate together. Our battery cell can still work normally when measured to a height of 1 meter. 9) Fix the whole lithium battery together with an insulating board, and wrap it with nylon tape, which is more durable. 10) When packaging the battery cell as a whole, please fix the battery cell and the protective plate together. Our battery cell can still work normally when measured to a height of 1 meter. Disclaimer: The articles published on this website are all from the Internet. If there is any infringement, please contact to delete it. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: Working principle and application analysis of aluminum ion battery