Do you want to activate the polymer lithium battery?

There has always been controversy about whether the polymer lithium battery is activated or not. Some netizens think that the general lithium battery does not need to be activated. If the battery is left for too long, you can charge it for a few hours after it is fully charged. More than 12 hours will not work. The common sense that everyone knows that the first three charging for 12 hours is for the original nickel-cadmium battery. Lithium batteries are not because they have no memory effect. Experts have said: the general formation process requires a period of low current charging and discharging. In order to form the SEI film on the electrode surface, this is of course not done by the ordinary user's charger. If there is really such a statement of activation, then it is so important. How can the processor leave it to the user to complete the process? So some users have reported that according to the relevant experience in practice, the lithium battery must be activated because the memory effect cannot be restored, but if the lithium battery is not activated, it will cause insufficient capacity The problem can be recovered. Regardless of the standard lithium battery of any digital device, it must be activated when it is activated. Many users do not scientifically activate the lithium battery during the process of using it. As a result, the lithium battery cannot reach the optimal capacity. It is easy to mistakenly believe that this is a memory effect. Generally, the battery has the following activation process: Activation process 1: The lithium battery that has just been used generally has remaining power, so do not charge it at this time. Put the battery into the product and use it normally until the battery is too low to turn on at all. Activation process 2: The first time you charge, it is best to use the original charger to charge, and it is better to turn off the charge. Many people do not turn off the charge for the convenience of use, which is not conducive to activating the lithium battery capacity. And remind everyone to continue charging for more than 12 hours and less than 15 hours. If the message is overflowing during this period, don't bother to unplug it and keep it charged! Activation process three: After the first overflow, if it is used normally, it cannot be turned on. You can press process two again to continue the operation! Activation process four: complete discharge, fully charge (ie repeat process two and process three) repeated three times. At this time, the battery is activated successfully and can reach the best capacity state. Note: Lithium batteries are often activated at the factory, so do not activate the buyer again. If it is suggested not to use the universal charger during the activation period. If it reaches the normal period of use, the universal charger is unnecessary. Because the original charger is the most suitable. Universal charger, current unstable, does not necessarily match the voltage of the lithium battery, it may accelerate the aging of the lithium battery. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the advantages and disadvantages of capacitive lithium batteries?