Demystifying digital camera battery maintenance tips

Digital camera battery maintenance tips Battery maintenance For a (segment) digital camera battery, the use time is not only related to its quality and power, but actually also very relevant to the user's operation. Most photography enthusiasts will habitually put the camera in the camera bag or cabinet without removing the battery after using the camera. This sounds okay, but it does not protect the battery. Generally speaking, if you use the camera for more than 15 days, it is best to take the battery out and put it in a cool and dry place. Do not store batteries and metal objects. According to our survey, most digital cameras on the market use lithium batteries, which are easier to store. The only thing to pay attention to is not to use it for a long time. It is best to activate the battery every 2 months, that is, to discharge it once, so as to effectively extend the battery life. Regarding the NiMH 5th battery, the most troublesome thing is the memory effect, which will reduce the total capacity and use time of the battery. As time goes by, the battery will store less and less power, and the rate of battery consumption will also increase. It will get faster and faster. Therefore, you should try your best to use up all the electricity before recharging, and you must charge it to the fullest for each charge. If you temporarily use alkaline batteries when you go out, you must remember to remove them in time. Otherwise, once it is not used for a long time, the battery will easily drip and corrode the circuit, and the camera is destined to be scrapped. Regarding users who use alkaline batteries, as mentioned above, after using the digital camera, you must remember to remove the battery to prevent battery fluid from damaging the machine. Suitable for users of rechargeable Ni-MH batteries and lithium batteries. Battery charging is very particular. The battery you just bought is very low or has no power at all. It must be fully charged the first time. Lithium batteries generally take more than 8 hours to charge, while nickel-hydrogen batteries generally take more than 16 hours to charge. To achieve the best results, the battery must reach its maximum charge capacity, and it must be recharged more than 3 times. After using the battery three times, it is best to find an opportunity to fully discharge the battery before charging. Try not to repeatedly charge the battery when there is still remaining power, otherwise it will shorten the battery life. Generally, after the battery is hot, it is best to wait for the battery to cool before loading it into the camera. But it should be noted that lithium batteries have no memory effect, so do not discharge, otherwise it will only damage the battery structure and consume battery life. In addition, in order to prevent power loss, users of nickel-metal hydride batteries should not allow the positive and negative electrodes of the battery to contact the conductors at the same time after charging the battery. For example, do not touch the two ends of the battery with their fingers. Users of lithium batteries should try to keep the positive and negative contacts of the battery in the camera battery box clean. If necessary, wipe the battery with a dry cloth, and then insert the battery. It is also important that even users who use lithium batteries must fully discharge the digital camera after not using it for a long time and store it in a dry, cool environment. Equally important, users of nickel metal hydride (nimh) and lithium batteries are advised not to store fully charged batteries in bags, pockets, handbags or containers containing metal objects to prevent short circuits. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Charging tips for lithium battery chargers