Which types of lead-acid batteries leak? How to deal with it?

1. Reasons for the processing technology Although the processing technology of the battery is relatively mature, the processing technology of some small and medium-sized manufacturers is still relatively backward, and there may be situations in which the sealing is not tight and the shell has cracks that have not been detected during the processing. This kind of battery with backward processing technology has a great potential for leakage. 2. The cause of the collision Whether it is during transportation, handling, or installation, the battery may crack due to the collision, which will lead to later liquid leakage. Most of the shell materials of conventional lead-acid batteries are ABS materials. Although the hardness is very good, the toughness is relatively poor, which is what we call relatively brittle. When encountering a relatively strong impact, the impact force is greater than the ABS material itself. The shell of ABS material may crack. 3. Reasons for long service time When the battery is used for a long time, some seals will reach the service life, and leakage is likely to occur. How to deal with the leakage of lead-acid batteries 1. Because lead-acid batteries contain sulfuric acid and are corrosive, you must wear gloves and wipe the batteries clean with a dry cloth. 2. Whether the battery is placed on its side or upside down. The battery should be placed correctly, not on its side or upside down. 3. Whether the sealing glue of the battery has fallen off. If it falls off, the easiest way is to seal it with glass glue. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: What are the differences between lithium battery packs and nickel-metal hydride batteries?