What to pay attention to when using lithium-ion battery for sweeping robot

In the daily use of the sweeping robot, pay special attention to the following aspects, which can extend the battery life and maintain the performance of the smart sweeper product battery: 1. Keep the automatic sweeping robot clean. If the side brush and roller brush of the automatic sweeping robot stick Excessive hair and trash will consume more power and require a larger drive current, which is very unfavorable to the battery. Diligent cleaning is one of the important ways to ensure the performance of the battery. 2. Let the automatic sweeping robot fully release the power every three months. The Ni-MH battery still has a low memory effect. In order to offset the impact, it is recommended that you fully release the power once every three months: do not turn on the power of the charging base, automatically when the power is low The sweeping robot will not find the charging base until the power is exhausted. When the battery is completely exhausted, please make sure to charge it as soon as possible, otherwise the battery capacity will be damaged, remember! 3. Even if it is not practical to remove the battery if it is not used for a long time, the automatic sweeper will still weakly consume the battery power, so if you do it for a few weeks If you do not plan to use the automatic sweeping robot for a longer period of time, ensure that the battery will be removed after it is fully charged and stored in a cool, dry place. When you need to use it again, just install the battery and fully charge it. Due to the self-discharge characteristics of Ni-MH batteries, the power will gradually decrease. Ensure that the battery is fully charged at least once every 3 months, otherwise the battery may be over-discharged and scrapped. 4. The characteristics of the Ni-MH rechargeable battery of the automatic intelligent sweeper are often used. The high performance of the battery can be ensured when the battery is often discharged and used frequently. The most important point to maintain the battery performance is to ensure that the battery is used frequently. 5. The charging state ensures the heat dissipation of the machine. When the automatic sweeping robot is charging, the automatic sweeping robot and the charging base are placed on a flat and solid surface to help dissipate heat. Do not place the charging automatic sweeping robot on a heavy carpet, and ensure that there is enough space around the charging base. Place the automatic sweeping robot in a dry and dark place to prevent the automatic sweeping robot from being exposed to the sun, and keep it away from heat sources such as heating equipment and hot air outlets. 6. When not in use, ensure that the charging base is kept powered on. At present, most smart sweepers support automatic automatic charging and provide a charging base. Please ensure that the automatic sweeping robot is kept on the charging base. If there is no charging base, please keep the automatic smart sweeper powered on. According to the precautions of the above points, it can effectively ensure that the battery of the sweeping robot can be used for an extended period of time, preventing all kinds of unnecessary troubles. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What is MSDS certification for lithium-ion batteries?