What to pay attention to when installing UPS battery

①When installing the UPS battery, first be careful not to install it in a closed space, and at the same time, do not close to any fire source, otherwise there will be a danger of explosion. After putting the battery into the box for normal use, you should also pay attention to the air circulation, and check it regularly to ensure its safety. ②Be careful not to overturn the UPS battery with materials that can generate static electricity, such as vinyl film, otherwise it may cause static electricity due to friction with the air and cause an explosion. Sticky or marking objects should also pay attention to pressing the upper cover. If the upper cover is pressed, the exhaust valve under the upper cover will not be able to normally discharge the gas emitted by the UPS battery, so that the battery cannot normally contact the air. If the heat emitted by the battery cannot be evacuated in time, it will cause fires, explosions and other accidents. ③ Keep the UPS battery away from the fire source and keep the contact environment dry. Don't let the battery come into contact with water. There is a new chance that water will enter the battery. Otherwise, it will be easy to short-circuit and get an electric shock or even cause a fire. In the same way, there is a reason to be aware of the dust environment, and try to beware of the possibility of short-circuits. ④ The UPS battery installation should be carried out at a relatively normal temperature. If it is below minus 40 degrees, the battery cannot operate normally, and if it exceeds minus 60 degrees, it may cause the battery to overheat and cause fire or explosion accidents. . ⑤When using multiple UPS batteries at the same time, try to use batteries of the same manufacturer, new and old level, and the same capacity. If you use different lithium battery packs together, it may be due to the characteristic problems or quality defects of some of the batteries. Cause damage to the machine, so you should be alert for this situation. ⑥ It is best to stand upright, which is more conducive to guard against side leakage of battery liquid. In order to guard against the influence of leakage, an anti-corrosion pad can also be placed on the bottom of the battery. ⑦If there are more batteries and the current is larger, it is recommended to make a copper transfer bar in the battery rack or battery cabinet to facilitate the wiring and also beware of accidents that may cause the battery to be pulled by the thick cable. ⑧The best distance between batteries should be about 5-10mm. The UPS battery must be kept in a stable battery rack or battery cabinet. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How will the lithium battery separator industry develop?