What should I pay attention to when maintaining and testing UPS power batteries?

Pay attention to the following matters when maintaining and testing the UPS power battery (1) When configuring the electrolyte, slowly inject sulfuric acid into the distilled water, and at the same time use a glass rod to stir constantly to mix evenly and quickly dissipate heat. It is strictly forbidden to inject water into the sulfuric acid to avoid occurrence It was extremely hot and exploded. (2) Clean the UPS battery and battery room regularly. It is strictly forbidden to spill water into the battery during the cleaning work. (3) Maintenance personnel should wear protective glasses to prevent sulfuric acid from splashing into the eyes. (4) In order to prevent the body and clothes of maintenance personnel from being burned and damaged by the electrolyte, protective measures should be taken. If the electrolyte gets on the skin or clothes, they should be scrubbed with 5% soda water immediately, and then washed with water. (5) Pyrotechnics are prohibited indoors, especially in the charging state, do not bring any pyrotechnics or devices that can produce sparks into the room. The electric heating should be disabled during regular charging. (6) The doors and windows of the battery room should be tight to prevent dust from entering, and should be kept clean, dry, and well ventilated. Do not expose the battery to direct sunlight. (7) When maintaining the UPS power battery, prevent electric shock, battery short circuit or open circuit, and often use insulating tools when cleaning. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the factors affecting the life of UPS batteries?