What should I pay attention to when assembling lithium iron phosphate batteries?

1. The connection of all wires must be firm. The bare copper wires are not allowed to touch each other (including interwoven touch), which will easily damage the controller and protect the lithium iron phosphate battery protection board, and the light will not turn on. During installation, it is forbidden to short-circuit between wires. 2. The waiting time for the lighting of the lithium iron phosphate battery during the wiring process will vary according to the time set by the controller. The capacity of the factory lithium iron phosphate battery pack is generally half-electric, and the light will be darker when it is first installed. It is in the normal range and lights up normally after 2-3 days of normal charging. 3. The installation time of the lithium iron phosphate battery pack is generally carried out during the day, and it is not suitable to install it at night. 4. In the use of batteries, it includes the protection of aluminum-plastic composite film, top sealing (edge u200bu200bsealing at the pole end), side sealing, and protection against mechanical impact and short-circuit. 5. Reliable positioning of the battery cell. After the lithium battery cell is assembled, it should be fastened firmly in the shell and will not move, so that the entire lithium iron phosphate battery structure is in a consolidated state. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: What is the impact of temperature environment on polymer lithium batteries