What matters should be paid attention to during battery assembly and use

1. Before assembling, check whether the battery is leaking, and clean the surface of the battery with a damp cloth. If the battery case is cracked or leaking, the battery should be disassembled and replaced immediately to prevent acid corrosion. 2. The battery should be assembled upright and not upside down. The distance between the adjacent batteries is greater than 2 mm. At the same time, it must be shock-proof and pressure-proof. The assembly must be firm. Do not move, impact or rub against each other during use. Seepage. 3. In order to ensure safe use, the battery box of the assembled battery must leave a vent hole of not less than 8 mm for ventilation, and it must not be blocked to prevent the gas formed by the battery from being concentrated in the battery box. 4. Each battery is connected in series according to the company's matching group requirements, the positive and negative polarity should be correct, and the fixed point contact should be guaranteed to prevent the formation of sparks. 5. The electric door locks, fuse holders and other devices that are easy to form electric sparks must be isolated from the battery. 6. To charge the battery, use a charger with matching parameters, and not overcharge and long-term power loss. 7. When the battery is in use, it should not be close to fire and heat sources. It is explicitly forbidden to expose to the sun under high temperature and hot periods. Beware of violent vibration and impact of the battery to prevent damage to the battery. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Suggestions on the use and maintenance of batteries