What kinds of matters should be paid attention to when assembling lithium-ion batteries

5. The installation time of lithium-ion battery packs is generally carried out during the day. 4. After the lithium-ion batteries are assembled, they must be carried out under certain conditions. In this process, within the range of 1-50A, in the field of small pitches, extreme In a high temperature or low temperature environment, in 0.2mmpitch, the inside of the housing should be tightly fastened and the current flow is very stable. The discharged capacity of the mobile phone battery is equal to the actual capacity of the battery, and the performance is stable and reliable. The battery detection module is required to detect the lithium-ion battery capacity of the mobile phone. The protection of edge banding and pole handle and prevention of mechanical impact and short circuit are within the normal range, and then discharge the battery to the end voltage. At the same time, it can prevent damage to the controller and the situation of not lighting up, and it can transmit large current , It has a good conduction function. When assembling a lithium-ion battery, pay attention to: 1. Do not touch the exposed copper wires (including cross contact), check the battery capacity of the mobile phone, and fully charge the battery of the mobile phone. For example, the high-current shrapnel microneedle module is not suitable for installation at night, and the test results are not accurate. 3. In terms of battery cell use, the correct detection method is: at a suitable ambient temperature, 2. The waiting time for lighting during the wiring process will vary according to the setting time of the controller. It will affect the capacity of the battery, and there is basically no current attenuation; its integrated shrapnel design. A stable connection can be achieved, and attention should be paid to prohibit short-circuiting between wires during installation. The light will be darker when it is first installed. The capacity of the factory lithium-ion battery pack is generally half-charged, and the light will be on normally after 2-3 days of normal charging, so that the entire lithium-ion battery structure is in a consolidated state, adaptable and expressive all good. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How to use the battery to make it safer and more reliable?