What is the technical process of lithium battery packaging?

Lithium battery packaging technology process 1. Lithium battery battery material processing Some materials used in secondary batteries, such as lithium ions, require special treatment. The electrode should be processed at a high speed without damaging the fragile active material. In the electrolyte, special consideration should be given to the prevention of precipitation and corrosive gases. 2. For the operation of the cam unit packaged with lithium batteries, if a cylinder or AC servo actuator is used to construct the machine, the cycle time is less than 1 second, even if it is maintained in good condition when a new machine is installed, it is difficult to synchronize or maintain a stable condition for a long time. Then, the cylinder reaches the end of its running distance in a short time, so its maintenance cycle is short. In the cam mechanism of the machine structure, such a problem can be solved because all the drives are maintained by the smallest motor. 3. The installation and base of the lithium battery packaging equipment establish a strong installation and foundation for the machinery, which is very important for long-term stability. The installation and base can shorten the start-up time by minimizing the accuracy deviation of the transmission and transmission mechanism. Usually, the use of aluminum frames is eliminated. Use thick square logs and the substantial foundation of the can manufacturing process to build a stable foundation. Regarding various requirements, annealing can be carried out and mounts with extra precision can be used. 4. The vacuum treatment of battery packaging not only has a simple vacuum chamber and furnace, but also has a vacuum chamber operation process and a mechanism for liquid application equipment. Must have a wealth of knowledge of special vacuum equipment and parts such as vacuum pumps, pipes and valves. 5. The precise positioning of the lithium battery packaging must have the desired positioning technology and relevant experience, and the efficient processing and calibration system can be realized according to the requirements of mechanical positioning and image processing. In order to maintain the accuracy for a long time, it is necessary to realize the control of the camera or the positioning table, and also realize the precise positioning, including the installation design. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: What are the differences between capacitors and batteries?