What is the reason for the bulging of lithium batteries? How to solve

1. Overcharging caused by overcharging will cause all the lithium atoms in the positive electrode material to run into the negative electrode material, causing the original full grid of the positive electrode to deform and collapse. This is also an important reason for the decrease in the power of the lithium battery pack. In this process, there are more and more lithium ions in the negative electrode, and the excessive accumulation makes the lithium atoms grow out of the tree stump crystals, causing the battery to swell. 2. The bulging SEI film caused by over-discharge will have a protective effect on the negative electrode material, so that the material structure is not easy to collapse, and the cycle life of the electrode material can be increased. The SEI film is not static, there will be a little change during the charging and discharging process, the most important thing is that some organic matter will undergo reversible changes. After the battery is over-discharged, the SEI film will be reversibly broken, and the SEI protecting the negative electrode material will collapse after the destruction of the negative electrode material, thereby forming the bulging phenomenon of the lithium battery. If the charger used does not meet the requirements, it may cause the battery to swell at the slightest degree, and may cause a safety accident or even an explosion. 3. Processing and manufacturing process issues: The manufacturing level of lithium battery packs is uneven, the electrode coating is uneven, and the processing technology is relatively rough. How to solve 1. Start to replenish the power after using up or down half of the power. In rare cases, perform a complete discharge and full charge maintenance (for example, after a few months to half a year, it is completely discharged once, and it is easy to charge and discharge frequently. Long crystallization), this can greatly reduce the amount of crystallization, which can clearly slow down the bulging phenomenon. 2. The bulging lithium battery can be discarded straight, because the power capacity is already very small, and there is no power after a short circuit. 3. Lithium battery packs generally need to be professionally recycled to avoid pollution. If there is no solution, they should be thrown into the sorted recycling trash bin at the service point of the telecommunications service provider. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.