What is the cause of blistering in lithium battery processing?

With mechanical defoaming agent, lithium battery defoaming is as simple as that! In recent years, with the rapid development of my country’s lithium battery industry, lithium batteries have become green and environmentally friendly, high power tolerance, long life, high and low temperature adaptability and other advantages. One of the important new energy sources in my country. However, lithium batteries face a large number of blistering problems during processing and still need to be resolved. In the processing of lithium batteries, the main reasons for blistering are: 1. The electrolyte is unstable, differentiation and gas occur, resulting in blistering; 2. Excessive molding current causes blistering; 3. Various chemical substances are mixed and reacted to produce foam; 4. Poor water control during processing, or too high moisture content of the negative plate, resulting in foam. Lithium battery blistering damage: 1. Affect the quality, capacity and discharge of the lithium battery; 2. Make the electrolyte flow and leak in the battery, causing electrolyte pollution; 3. Affect the processing progress and service life of the lithium battery; 4. Foaming Seriously, it also wastes data, slows down the processing progress, and increases costs. The use of Fenggu mechanical defoamer can quickly eliminate foam. As an automatic foam elimination equipment, mechanical defoamer has high temperature resistance, strong acid and alkali resistance. It can be used in acids, alkalis, salts, electrolytes and water, and does not affect the basic properties of the foaming system. It has the characteristics of fast defoaming , Defoaming, foam suppression, very suitable for the processing of lithium batteries. In lithium battery slurry, conductive liquid, battery water, electrolyte, lithium battery liquid, flotation, battery, battery activator, electronic slurry compatibilizer, battery, battery repair, electrolytic polishing liquid electrolyte, conductive material, conductive slurry, Phoenix Valley Machinery can be used for defoaming agents in liquid media such as battery slurry and battery cover liquid bubbles. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.