What factors cause the UPS battery pack to self-discharge?

In the UPS charging process, it is assumed that the charging voltage is too high, which will cause the UPS power battery to be overcharged, and vice versa, it will cause the battery pack to fail to charge. Years and months when the charging voltage is abnormal may cause errors in the battery establishment data. Therefore, when installing battery packs, you must pay attention to the accuracy of battery standards and quantities. Substandard and different brands of batteries should be prevented from being mixed as much as possible. It is also best not to choose low-priced and defective products for external chargers. 2. The charging current is similar to the UPS voltage requirement. When charging and discharging the UPS power battery pack, try to beware of excessive current passing through. Of course, some UPS battery packs can be used for large currents that must be scaled, but you should still be as alert as possible during internships, otherwise the battery plates will be deformed, resulting in increased internal resistance of the battery, and the battery capacity will be severely reduced in severe cases. , Resulting in a significant reduction in battery pack life. 3. Depth of Discharge The depth of discharge of UPS is also extremely important for battery life. The deeper the depth of battery discharge, the fewer cycles it uses, so beware of deep discharge of the battery during use. Although some brands of UPS have a discharge support function, assuming that the UPS is in a light-load discharge or no-load discharge, the battery will be deeply discharged, which will affect the service life of the battery pack. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.