What equipment is needed to make lithium battery packs?

①There must be a good battery cell, after all, the battery cell is the core of storing and outputting power. ②There must be a good lithium battery protection board. The protection board is the core component of the lithium battery pack. A good protection board can effectively protect each string of cells in the lithium battery pack from overshoot and overdischarge, and it can also make each string Try to charge the battery as full as possible, and avoid the phenomenon that some batteries are already overflowing and some are still much worse. ③Good welding skills are required. ④ The circuit should be reasonable, and the appropriate thickness should be selected according to the actual current in the circuit, to ensure the quality of the circuit welding, and be wary of the phenomenon of circuit overload, heat and fire during the use of the lithium battery pack. ⑤You must have a sophisticated lithium battery equalization protection board. The current protection boards on the market are good and bad, and there are analog batteries, which are difficult to distinguish from the appearance. It is better to choose digital circuit control, such as Seiko chips. ⑥Use a special charger for lithium batteries, not a charger for general lead-acid batteries, and the charging voltage must match the equalization starting voltage of the protection board. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How long is the life of the lithium iron phosphate battery?