What details should be paid attention to when installing a modular UPS power system?

What details should be paid attention to when installing modular UPS power system? Modular UPS power products have a low stability failure rate and are easy to maintain. Each system consists of a power supply module, a monitoring module, and a static switch. The power modules can be connected in parallel to evenly distribute the load. In the event of a failure, the modular UPS system will automatically exit the system, and the load will be borne by other power modules, which can be expanded horizontally and vertically. Unique redundant parallel technology eliminates single points of failure. ◆According to the relevant regulations of the manufacturer's product manual, the phase, neutral, and ground wires connected to the online UPS power supply should meet the requirements, and their order cannot be changed at will. ◆Reasonably choose the installation location. A good installation location is very important. The modular UPS must be placed in a well-ventilated place, away from water, flammable gas and corrosive agents, and the ambient temperature should be kept between 0~40C. ◆Before installing the UPS power lithium ion battery, please check whether the battery shell is physically damaged to further confirm whether it will affect the inherent quality of the product. ◆After using the modular UPS power supply, it is no longer necessary to add an AC voltage stabilizer. If it must be added, it should be added to the front stage of the UPS, that is, first through the AC voltage stabilizer, then through the UPS, then to the load, and then supply power to the grid. ◆The switches used in the AC power distribution cabinet connected to the online modular UPS power supply should not be equipped with knife switches or fuses. An air switch should be used. The air switch has an arc suppression function, and the response speed is short when the load or the online UPS power supply is short-circuited. Fast, with functions such as leakage protection and overheating protection. ◆When installing the modular UPS power supply, pay attention to setting up a separate distribution board for its load, which is helpful for centralized and reliable control of the UPS and the protection of the load. ◆Be sure to consider the potential rising demand of the customer's power load. Especially in the deployment of single-phase equipment, it is usually necessary to choose a UPS that exceeds the current power requirements of the customer but can provide a longer running time, so as to meet the rising demand in the future. ◆Before installing the Zhongda machine, open the door of the machine and check whether the circuit boards, cables, DC capacitors, fuses, screws, wires, mechanical parts, transformers, etc. in the machine are loose or fall off. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How to recycle used lithium iron phosphate batteries?