What are the treatment methods for lithium battery UPS power in the factory

The processing process of modern industry involves many types of equipment, the load equipment itself and the power supply required by the processing process. Modern factories can generally be divided into the following 3 types according to the load category: 1. Industrial equipment: such as semiconductor packaging equipment, SMT placement machines, etc.; 2. Processing management and control systems: such as DCS systems, monitoring and alarm systems, etc. ; 3. Factory IT system: such as ERP system, PLM system, etc. According to different types of loads, different types of lithium battery UPS power supplies can be configured to improve the system. The mains power supply and the generator set are the two main power supplies of the factory, which are switched through the ATS automatic switch. After power distribution, it is connected to the UPS system. Generally speaking, industrial equipment pushes the UPS parallel system to ensure its power supply. At the same time, according to the detailed and incompatible load, it is necessary to specifically decompose the load capacity of the UPS power supply product. At present, many processing equipments in the industry are impact loads, so the lithium battery UPS power supply products can only be configured and used when the impact current resistance capability of the lithium battery UPS power supply meets its requirements. Due to the continuous improvement of the degree of automation, modern industries use a large number of processing management and control systems. The power supply of these systems can choose to use the same set of UPS systems as the industrial equipment, or you can choose to use a separate UPS system. Since the processing management system generally does not have impact loads, the requirements for the load capacity of the UPS are not high, and the degree of intelligence (such as remote monitoring and other functions) of the UPS is relatively high. Modern factories rely more and more on the support of ERP, PLM and other IT management systems. The hardware equipment involved in this part also needs power supply. Generally speaking, it is not recommended to use the same set of UPS systems for the factory’s IT system and processing. . In addition to high requirements for lithium battery UPS power supply in the factory’s IT system, there are other requirements such as good scalability, good maintainability, and high degree of intelligence. The power supply system of the factory equipment lithium battery UPS power supply product includes single-in-single-out, three-in-single-out, and three-in-three-out. It can supply stable power to the processing equipment of the factory to ensure the operation of the processing line; it can block abnormal power from the load. At the same time, it can ensure the stability of the output power and let the load run. Industrial-grade online lithium battery UPS power supply system starts from the characteristics of low disturbance and continuous operation, and uses DSP digital control technology to speed up data resolution and excellent output performance; reduce the manpower and capital costs of system maintenance. It can supply stable sine wave power with output power of 0.9 and overall efficiency of 0.93. It adopts digital control technology to realize the functions of parallel expansion and parallel redundancy, and provides flexible power supply planning for the power supply system of the factory lithium battery UPS power supply processing method. Guaranteed. Disclaimer: Some pictures and content of articles published on this site are from the Internet, please contact to delete if there is any infringement. Previous: What are the advantages of lithium iron phosphate batteries