What are the tips for battery maintenance?

Six tips for battery maintenance for reference: Tip 1: It is strictly forbidden to store the battery in the state of loss of electricity during storage. Sulfation is easy to occur. Lead sulfate crystals are attached to the plate, blocking the ion channel, resulting in insufficient charging, and the battery The capacity drops. The longer the idle time in the deficient state, the more serious the battery damage. Therefore, when the battery is not in use, it should be recharged once a month to better maintain the battery's health. Tip 2: Regular inspections. If the continued mileage of an electric vehicle suddenly drops more than ten kilometers in a short period of time, it is very likely that at least one battery in the battery pack has broken grids, softened plates, and fallen off of active materials on the plates. At this time, you should go to a professional battery repair organization for inspection, repair or assembly in time. This can relatively extend the life of the battery pack and save money to the greatest extent. Tip 3: Prevent high-current discharge When electric vehicles start, carry people, or go uphill, please use their pedals to help prevent instant high-current discharge. High-current discharge easily leads to lead sulfate crystallization, which damages the physical properties of the battery plate. Tip 4: Correctly grasp the charging time. Generally, the battery is charged at night, and the average charging time is about 8 hours. It is best to charge the battery once when the depth of discharge is 60%-70%. In actual use, it can be converted into riding mileage, and necessary charging is carried out according to the actual situation to prevent damaging charging. Tip 5: Prevent the excessively high exposure temperature of the battery, which will increase the internal pressure of the battery and force the battery pressure limiting valve to open automatically. The direct result is the decrease of battery activity, accelerates the softening of the plates, and causes the shell to heat up during charging. Fatal injuries such as bulging, deformation, etc. Tip 6: Prevent plug heating during charging. The loosening of the charger output plug and the oxidation of the contact surface will cause the charging plug to heat up. If the heating time is too long, it will cause the charging plug to short-circuit, directly damage the charger and cause unnecessary losses. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the advantages of high-rate polymer lithium batteries?