What are the steps to extract pure lithium from lithium batteries

First, you cut off the top of the battery to expose the lithium metal foil roll inside. Just put the battery down and burn it. This should not take a long time and usually does not damage most of the lithium metal in the battery. Once the fire comes out, it lasts. 1. If you see a fire, wear protective equipment and don't panic, then use a cutter to carefully remove the top from the battery. This is when you are most likely to accidentally cause a short circuit. Try to cut the tough outer edge of the shell without touching the center core. 2. Cut any connections quickly and remove any rings or disks from the top of the battery. Cut and peel off the casing to expose the metal core, which is lithium. Use pliers to extract lithium. Try not to pierce the central plastic container, as this will cause short circuits and fire. It's a bit like playing the game of manipulation, unless you touch something that shouldn't be, you will heat the metal and may see a bigger fire. 3. Pull the plastic tape or wrap and unfold the metal. The shiny metal is aluminum foil, which you can remove and discard. The black powder material is electrolyte, you can wrap it in plastic and discard it in a fireproof container. Remove any other plastic. You should leave lithium metal flakes. When you go from silver to brown, it will oxidize. 4. Use the lithium in the lithium battery immediately. Because it degrades rapidly in the air, especially in humid air. You can use lithium in other places (for example, it burns bright white parts as metal, which makes the flame red) or store lithium in liquid paraffin oil. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Analysis of UPS battery capacity test methods