What are the safe operation specifications for UPS batteries?

UPS battery safety operation specifications When using UPS batteries, you must first know the performance of the battery, because the installation of the battery requires certain skills, and also pay attention to operational considerations in order to better master this knowledge and make better use of it. . UPS battery, as a kind of charging and discharging power supply equipment, is often used in our daily work. Batteries contain electrolyte, which is a dangerous chemical substance. In daily use, we should pay attention to some operating specifications to improve work efficiency. 1. It is strictly forbidden to pour pure water directly into sulfuric acid to prevent the temperature of the pages from rising suddenly and causing splashing of concentrated sulfuric acid. 2. UPS battery maintenance personnel must wear acid-resistant protective equipment such as protective glasses, rubber gloves, aprons and rubber shoes to prevent sulfuric acid corrosion and burns. 3. It is strictly forbidden to place conductive objects on the UPS battery pack. The operator must remove possible conductive objects such as watches before work to prevent sparks or even explosions in the external short circuit of the battery. 4. When loading and unloading UPS battery packs, lifting equipment with corresponding weight must be used, and the battery must not be placed under the battery pack during hoisting to prevent the battery pack from falling. 5. Smoking, open flames, static sparks, etc. are strictly prohibited in the battery charging place to prevent a small amount of hydrogen explosion during battery charging. 6. The temperature of the battery should not exceed 55°C, otherwise the life of the UPS battery will be reduced. Therefore, the temperature at the beginning of charging must be lower than 45°C. If the temperature is higher than 45°C, wait until it cools down before charging. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the factors affecting the cycle performance of lithium batteries?